COMBINED SYNOPSIS / SOLICITATION
Commercial Services | USCGC Maple Fuel System Repair
Solicitation Number
52000PR270000400
Procurement Type
Request for Quotations (RFQ) – Commercial Services
Issuing Agency
United States Coast Guard (USCG)
Period of Performance
TABLE OF CONTENTS
Solicitation Information. 3
Description of Solicitation. 3
Schedule of Supplies / Services (Price Schedule). 3
3.1 Vendor Information (To Be Completed by Offeror). 4
4.1 General Information. 5
4.2 Background. 5
4.3 Scope of Work Requirements. 5
4.3.1 Contractor Responsibilities. 5
4.3.2 Specific Work Items. 5
4.4 Condition Found Report (CFR) Requirement. 5
4.5 Materials & Parts. 6
4.6 Testing & Acceptance. 6
4.7 Deliverables. 6
4.8 Environmental & Safety Compliance. 6
5.1 Instructions for Submitting Quotations. 7
5.2 Basis for Award. 7
Applicable Clauses and Provisions. 7
Solicitation Information
Solicitation Number: 52000PR270000400
Procurement Type: Request for Quotations (RFQ) – Commercial Services
Set-Aside Designation: Small Business Set-Aside
Issuing Agency: United States Coast Guard (USCG)
Unit / Vessel: USCGC Maple (Asset Type: CB-L, Hull Number: 22355)
Location of Work: 2301 E Fort Macon Rd., Atlantic Beach, NC 28512
Period of Performance: TBD
Unit Point of Contact (POC): MKC Rand Willette | Phone: 813-997-6886 | Email: Rand.a.willette@uscg.mil
COR: Stephen Donithan |Stephen.W.Donithan@uscg.mil
Contracting Officer (Contracting Actions only) |Joshua.C.Richardson2@uscg.mil
This is a combined synopsis/solicitation for commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6 and FAR Part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a separate written solicitation will not be issued.
Solicitation Number 52000PR270000400 is issued as a Request for Quotation (RFQ). This acquisition is set aside 100% for Small Business concerns. All responsible small business sources may submit a quotation which shall be considered by the agency.
Contractors shall provide firm-fixed-price (FFP) quotations for the following Contract Line Item Numbers (CLINs):
CLIN
Description
Qty
Unit
Unit Price
Total Price
0001
Fuel System Repair and Fuel Polishing (USCGC Maple CB-L 22355): Provide all labor, materials, equipment, and supervision to replace high-pressure fuel pump, feed pump, fuel banjo, banjo gasket, fuel O-ring, and injectors due to water contamination; clean fuel cooler and lines; polish fuel; and conduct operational testing in accordance with the attached Scope of Work (SOW).
1
Job
$__________
$__________
TOTAL
Total Quoted Price
$__________
4.1 General Information
Unit: USCGC Maple
Asset Type: CB-L
Hull Number: 22355
Location of Work: 2301 E Fort Macon Rd., Atlantic Beach, NC 28512
Period of Performance Dates: 10/25/2026 – 11/15/2026
Unit POC: MKC Rand Willette / 813-997-6886 / Rand.a.willette@uscg.mil
4.2 Background
While underway, the 22355 received a fault code for low fuel rail pressure: Code MID:128 PID 164 FMI 1 on Engine SN A1186212.
4.3 Scope of Work Requirements
4.3.1 Contractor Responsibilities
Provide all labor, materials, equipment, and supervision necessary to complete the work described.
Comply with all applicable USCG policies, manufacturer specifications, and regulatory requirements.
4.3.2 Specific Work Items
4.4 Condition Found Report (CFR) Requirement
If additional discrepancies, deficiencies, or required repairs are identified that are outside the defined Scope of Work, the contractor shall:
Immediately notify the Unit POC.
Submit a written Condition Found Report (CFR) detailing:
Description of discrepancy
Recommended corrective action
Parts and labor breakdown
Cost estimate
Impact to schedule
Note: No additional work outside the approved Scope of Work shall be performed without written authorization from the Government. Unauthorized work will not be reimbursed.
4.5 Materials & Parts
Original Equipment Manufacturer (OEM) parts are required unless otherwise approved.
Provide part numbers and specifications.
All materials shall meet manufacturer and USCG standards.
4.6 Testing & Acceptance
Conduct operational testing upon completion.
Demonstrate proper functionality to the USCG representative.
Provide written service report and warranty documentation.
Work is considered complete upon Government acceptance.
4.7 Deliverables
Itemized invoice
Service report
Parts list (with serial numbers, if applicable)
Warranty documentation (if applicable)
4.8 Environmental & Safety Compliance
Proper disposal of hazardous materials.
Spill prevention measures required.
Compliance with all federal, state, and local regulations.
5.2 Basis for Award
Award will be made to the responsible Small Business offeror whose quotation conforms to the solicitation requirements and is most advantageous to the Government, price and other factors considered (Technical Capability, OEM Parts Compliance, Past Performance, and Price).
The following Federal Acquisition Regulation (FAR) and Homeland Security Acquisition Regulation (HSAR) provisions and clauses apply to this solicitation and subsequent award:
FAR 52.212-1 – Instructions to Offerors—Commercial Products and Commercial Services
FAR 52.212-2 – Evaluation—Commercial Products and Commercial Services
FAR 52.212-3 – Offeror Representations and Certifications—Commercial Products and Commercial Services
FAR 52.212-4 – Contract Terms and Conditions—Commercial Products and Commercial Services
FAR 52.212-5 – Contract Terms and Conditions Required to Implement Statutes or Executive Orders—Commercial Products and Commercial Services (incorporating FAR 52.219-6, Notice of Total Small Business Set-Aside)
FAR 52.232-40 – Providing Accelerated Payments to Small Business Subcontractors
HSAR 3052.212-70 – Contract Terms and Conditions Applicable to DHS Acquisition of Commercial Items
The contractor must provide all labor, materials, equipment, and supervision to replace the high-pressure fuel pump, feed pump, fuel banjo, banjo gasket, fuel O-ring, and injectors due to water contamination; clean the fuel cooler and lines; polish the fuel; and conduct operational testing. The contractor must also comply with USCG policies, manufacturer specifications, and regulatory requirements, and submit a Condition Found Report if additional discrepancies are identified.
We post new defense, security & foreign affairs opportunities in North Carolina as agencies publish them. Get them in one email — free, and unsubscribe whenever.
"Solicitation 52000PR270000400.docx"69640"file"".docx""1""2026-10-29T17:57:58.478+00:00""fef8ae19bc30438d9d937eedbb159af0""public""0""public""9ffadf9535bf4da28c12b6b160d8c82f""0"2"0""22355_SOW.docx"57344"file"".docx""1""2026-10-29T17:57:58.478+00:00""47ce7408b5874858851dd8c648c2a541""public""0""public""d9316ab1e85941fc86fc205174911231""0"1"0"Most North Carolina work asks for the two below, and the solicitation documents are where it’s stated. One prequalification covers both — on this bid and the next.
A surety’s written statement that it expects to bond you up to a stated amount, subject to final underwriting. It’s what an agency asks to see before they take your bid seriously.
Source: SAM.gov (notice 526879462eea4e2ca1c52fa054383a3c), retrieved via the SAM.gov Get Opportunities API. View the official posting, and always confirm requirements and deadlines with the issuing agency.