Government · Hawaii

DRONE PLATFORM FABRICATION AND DELIVERY

State of Hawaii — Administrative Services OfficeIssuing agency·Hawaii·via a public procurement portal

2days left

Due Aug 13, 2026·Posted Jul 30, 2026

AI takeaways

The Department of Law Enforcement is seeking bids to fabricate, deliver, and install three drone platforms and three Skydio X10 stations on the roof of a building at 830 Punchbowl Street, Honolulu, Hawaii 96813.
Bids are due by 5:00 p.m. (HST) on August 12, 2026, via online submission on HIePRO, and the work must be completed by September 15, 2026.
The contract will be a firm fixed price, requirements contract, awarded to the lowest responsive and responsible bidder.
The platforms must be 40 in x 36 in x 4 in reinforced concrete rated at 4000 PSI with steel rebar, and a secondary base platform must be constructed to contour to the roof, capable of supporting up to 1,000 lbs.
The contractor must install Carlisle SynTec roofing materials over the base platform, and the roofing materials must be installed by a Carlisle SynTec certified technician.
The contractor must provide all labor, materials, equipment, transportation, and permits necessary for the work, including lifting/hoisting equipment to place the drone stations on the roof.
The Skydio X10 Drone Station Kits will be delivered on site by a third-party shipping agency, and installation of the Skydio Drone Stations will be completed by a Skydio Drone Technician.
The contractor is not required to construct or connect electricity or network provisions to the platform.
The three drone platforms must be separated by a minimum of 5 ft from each other and a minimum of 3 ft from the edge of the building or structure.
The contract term is for a twelve-month period beginning August 18, 2026, with an option to extend for one six-month period.
Requirement: All bidders or any subcontractors must have a current State of Hawaii contractor license, classification "B" General Building Contractor, a C-42 Roofing Contractor license, a C-31a Cement Concrete Contractor license, and any other license classification required for this scope of work.
Requirement: The successful bidder shall furnish a performance bond and a payment bond, each in an amount equal to one hundred percent (100%) of the awarded contract price, and shall also submit bid security with its bid in an amount equal to at least five percent (5%) of the base bid.
Requirement: The project is subject to HRS Chapter 104, and every laborer performing work at the project jobsite shall be paid wages at rates not less than the prevailing wages established by the DLIR for the corresponding classification of work.
Requirement: The Contractor shall maintain insurance acceptable to the State, including Commercial General/Product Liability with limits of $1,000,000 per occurrence and $2,000,000 aggregate, and Comprehensive Automobile Liability with limits of $1,000,000 per person and per accident.
Requirement: Liquidated damages for non-performance shall be fixed at the sum of TWO HUNDRED DOLLARS ($200.00) for each and every calendar day the Contractor delays in the completion of any item of this contract after the required date of said completion.

Bonding: performance bond and payment bond each in an…
Pre-bid: Jul 31
Licence: State of Hawaii contractor license,…
Term: twelve-month period,…

These takeaways are AI-generated and may be incomplete or wrong. Always verify every detail against the official documents before you bid.

Contact the buyer

Rawlin Sasamura

rawlin.s.sasamura@hawaii.govEmail 808-788-2209Phone

Location:

Oahu, HI

Open in Maps ↗

Solicitation

B27000148

LAW 26-SD-07

Method

Invitation for Bids (IFB) - Sealed Bids

Duration

twelve-month period, beginning August 18, 2026 or a designated official start date on the Notice to Proceed. The contract time of performance may be extended for not more than one (1) six-month period.

Category

Construction

Posted

Jul 30, 2026

Source

State of Hawaii — Administrative Services Office

More metalwork bids in Hawaii, weekly.

We post new metalwork opportunities in Hawaii as agencies publish them. Get them in one email — free, and unsubscribe whenever.

What this bid is asking for

AI-generated

Fabricate three drone platforms, each 40 in x 36 in x 4 in, constructed of reinforced concrete rated at 4000 PSI with steel rebar, and a secondary base platform to contour to the roof, capable of supporting up to 1,000 lbs.
Deliver and place the three drone platforms and three Skydio X10 stations on the roof of the building at 830 Punchbowl Street, Honolulu, Hawaii 96813, including lifting/hoisting the drone station kits onto the roof.
Install Carlisle SynTec roofing materials over the base platform, with installation performed by a Carlisle SynTec certified technician.
Provide all labor, materials, equipment, transportation, permits, and incidentals necessary to complete the work, including cranes, forklifts, and lifting materials.
Ensure each platform is level, stable, properly positioned, and ready for agency inspection, and remove all packaging, debris, and waste materials from the site.

Requirements

From the documents

Licence: State of Hawaii contractor license, classification "B" General Building Contractor, a C-42 Roofing Contractor license, a C-31a Cement Concrete Contractor license
Bonding capacity: performance bond and payment bond each in an amount equal to one hundred percent (100%) of the awarded contract price; bid security in an amount equal to at least five percent (5%) of the base bid

Posted Scope of Work

The Department of Law Enforcement is issuing this Invitation for Bid (IFB) to seek qualified bidders to fabricate 3x platforms per the specifications in the attached Solicitation documents. The three platforms will be required to be transported and delivered to one location on Oahu. All platforms must be lifted/ hoisted and installed on to the roof of the building in order to attach a drone docking station for Law Enforcement Drone First Responder activities.
A bidder must provide a bid for the line item.
For an offeror to be considered responsible and responsive, the bid must include a written statement, drawings of work, contractor certifications per the solicitation to confirm compliance with all specifications within this IFB and attached documents.
Please refer to the included solicitation document (LAW 26-SD-07...) for Scope of Work, specifications and other requirements prior to submitting a bid.

Line Items

Drone Platform Fabrication and Delivery — Qty 1 EACH
The Department of Law Enforcement is issuing this Invitation for Bid (IFB) to seek qualified bidders to fabricate 3x platforms per the specifications in the attached documents. The three platforms will be required to be transported and delivered to one location on Oahu. All platforms must be lifted/ hoisted and installed on to the roof of the building in order to attach a drone docking station for Law Enforcement support activities.
A bidder must provide a bid for the line item.
For an offeror to be considered responsible and responsive, the bid must include a written statement, drawings of work, contractor certifications per the solicitation to confirm compliance with all specifications within this IFB and attached documents.
Please refer to the included solicitation document (LAW 26-SD-07...) for Scope of Work, specifications and other requirements prior to submitting a bid.

Scope, read from the documentsAI-generated

The Contractor shall provide all labor, materials, equipment, tools, transportation, supervision, coordination, permits and other incidentals necessary to fabricate, deliver and place three drone platforms and three Skydio X10 stations at the designated location on the roof of 830 Punchbowl Street, Honolulu, Hawaii 96813. The platforms must be 40 in x 36 in x 4 in reinforced concrete rated at 4000 PSI with steel rebar, and a secondary base platform must be constructed to contour to the roof, capable of supporting up to 1,000 lbs. The contractor must install Carlisle SynTec roofing materials over the base platform, and the roofing materials must be installed by a Carlisle SynTec certified technician. The contractor must provide all equipment necessary for lifting/hoisting the drone station kits onto the roof, but is not required to construct or connect electricity or network provisions. The three drone platforms must be separated by a minimum of 5 ft from each other and a minimum of 3 ft from the edge of the building or structure.

Questions & answers

AI-generated

What is the due date for bids?

Bids are due by 5:00 p.m. (HST) on August 12, 2026, via online submission on HIePRO.

Where is the work to be performed?

The work is to be performed at 830 Punchbowl Street, Honolulu, Hawaii 96813, on the roof of the building.

What licenses are required for bidders?

All bidders or any subcontractors must have a current State of Hawaii contractor license, classification "B" General Building Contractor, a C-42 Roofing Contractor license, a C-31a Cement Concrete Contractor license, and any other license classification required for this scope of work.

Are bonds required?

Yes, bid bonds, performance bonds, and payment bonds are required for construction projects that are >$25,000.00. The successful bidder shall furnish a performance bond and a payment bond, each in an amount equal to one hundred percent (100%) of the awarded contract price, and shall also submit bid security with its bid in an amount equal to at least five percent (5%) of the base bid.

What is the deadline for completion?

The fabrication of the platform and delivery of specified materials and items must be completed no later than the designated suspense date of September 15, 2026.

Documents

Download zip

X10 Drone Dock Manual_Installation and Specifications.pdfPDF

DRONE PLATFORM FABRICATION AND DELIVERY

More metalwork bids in Hawaii, weekly.

What this bid is asking for

Requirements

Posted Scope of Work

Line Items

Questions & answers

Documents

The bonds you’ll need for this one

Not the right RFP for you?

DRONE PLATFORM FABRICATION AND DELIVERY

More metalwork bids in Hawaii, weekly.

What this bid is asking for

Requirements

Posted Scope of Work

Line Items

Questions & answers

Documents

The bonds you’ll need for this one

Not the right RFP for you?