The City of Douglasville is seeking Proposals from qualified vendors to prepare engineered construction documents, furnish, and install the proposed gateway signage along SR 92. Selected vendor must also obtain all permitting needed from Georgia Department of Transportation (GDOT). The City has hired Sky Design (the "City Representative') as Owner's representative to facilitate the signage installation.
1
Request For Proposal
For
City of Douglasville Hwy 92 Gateway Signage
RFP 2026-003
Issue Date: 06/25/2026
Due Date: 07/27/2026
2
I. General Project Information and Background:
The City of Douglasville (the “City” or “Owner”) is seeking Proposals from qualified vendors to
prepare engineered construction documents, furnish, and install the proposed gateway signage
along SR 92. Selected vendor must also obtain all permitting needed from Georgia Department of
Transportation (GDOT). The City has hired Sky Design (the “City Representative”) as Owner’s
representative to facilitate the signage installation.
II. Scope of Services: The project includes but is not limited to the following:
a. Review
i. The selected contractor is responsible for verifying all site conditions with
regards to fabrication and installation before manufacture of signage. Any
conditions that would impede the proper and timely completion of the work
should be presented to the Owner’s representative in writing.
ii. Locations shown on the Sign Location Plans are for general placement. The
fabricator shall confirm each sign location with the Owner’s representative
of any discrepancies in the design documents or graphics schedule as well
as discrepancies shall be brought to the attention of the Owner’s
representative prior to production.
iii. Any conflicting conditions with signage that are not coordinated prior to the
manufacturing of the scope of work will need to be addressed in the punch
list phase and will be the responsibility of the vendor.
b. Engineering
i. Footings: All footings to be verified by a structural engineer as part of scope.
Drawings show footings for intent only. An Engineer’s Stamp is to be
obtained when necessary to comply with permits and/or codes.
ii. Wind load: Exterior signs shall
Source: Georgia Procurement Registry (solicitation GEORGIA-PE-64850-NONST-2026-000000042), retrieved via the Georgia Procurement Registry (DOAS). View the official posting — always confirm requirements and deadlines with the issuing agency.
Here are some similar opportunities
Let our AI help you find the right opportunity
Search with AI →